Welcome to Omni Instruments!

omni Menu

Analog Transmitters

4 Item(s)

per page
  1. TxBlock & TxRail

    Temperature Transmitters TxBlock & TxRail

    $79.00

    TxBlock is a fully customer programmable head mount temperature transmitter. In-the-field configuration of input type and working range can be achieved by means of a cable and an RS232 port from a PC.

    TxRail represents the utmost technology in DIN rail mount temperature transmitters. Input type, working range and output calibration can be achieved by means of a cable and an RS232 port from a PC.

    Learn More
  2. Temperature Transmitter - TEMP-WM and TEMP-DM

    Temperature Transmitter - TEMP-WM and TEMP-DM

    $170.00
    The TEMP-WM and TEMP-DM transmitter series incorporate the best high accuracy and great stability temperature sensors. They convert the measured values into linear 4 to 20 mA signals and optional 0 to 10 Vdc output can also be offered under request. Learn More
  3. RHT-WM and RHT-DM

    Relative Humidity and Temperature Transmitters RHT-WM and RHT-DM

    $254.00
    Relative Humidity and Temperature Transmitters RHT-WM and RHT-DM with 4-20 mA or 0-10 Vdc outputs for temperature and humidity Wall or duct mounting - insertion lengths 150mm or 250mm. Using the digital communication interface, the transmitter parameters can be configured to tailor a particular application. The RHT-WM model is intended for wall mounting. The RHT-DM comes with a probe tip for duct mounting. Available with programmable ranges from -40 to +120°C (Wall-mounted units, -10 to 65°C) and 0-100% RH. Electronics module limited to -10 to 65°C Learn More
  4. RHT-P10 and RHT-XS

    Temperature and Humidity Transmitter - RHT-P10 and RHT-XS

    $312.00

    The RHT-P10 and RHT-XS transmitter series incorporate the best high accuracy and great stability relative humidity and temperature sensors. They convert the measured values into linear 4 to 20 mA signals and optional 0 to 10 Vdc output can also be offered under request. The microprocessor based circuit enables full configuration of output range when used with the TxConfig PC interface and the Windows® based software.

    RHT-P10 model is aimed at humidity and temperature monitoring in pressurized or vacuum systems. Sensor probe in Stainless Steel can be thread mounted in the supplied flange or directly to the system wall or pipe.

    RHT-XS is aimed at humidity and temperature monitoring in non-pressurized systems that require a remote sensor.

    Learn More

4 Item(s)

per page