	( +1-866-849-3441	* info@omniinstruments.net
	( +44 (0) 845 9000 601	* info@omniinstruments.co.uk
	( +61 (0)282 442 363	* info@omniinstruments.com.au

Request a Quote

Products

Data Loggers

Displacement Sensors

Display & Control Products

Flow Meters

Gyros & Accelerometers IMU's & Tilt Sensors

Level Sensors

Load & Torque Sensors

Pressure Sensors

Radio & GSM Telemetry

Recorders - Chart

Stock Clearance Items

Temperature and Humidity

Test & Calibration

Vibration Monitoring

Voltage & Current Sensors

Weather Stations and Instruments

Handheld Instruments

Gas Detection Equipment \ Fixed Gas Sensors for Toxic and Flammable gases \ OLC 10 / OLCT 10 Flammable / Toxic Gas Detector

«« previous product 2 / 6 next product »»

OLC 10 / OLCT 10 Flammable / Toxic Gas Detector

Designed for use in boiler rooms and parking garages, the OLCT 10 and OLC 10 monitors give you the most cost-effective solution for the continuous monitoring of toxic (OLCT 10) or flammable gases (OLC 10) and vapors in ambient air. Easy to install and operate, these detectors combined with the MX 15 control unit meet demanding user requirements

Hazardous Area Approved

Downloads

Send page to a colleague

Product details

• Toxic gas monitor (OLCT 10)
• Combustible gas monitor (OLC 10)
• Designed for boiler rooms and car parks
• ATEX Approval for use in hazardous areas
• IP66

Detectors:	OLC 10/OLC 10 TWIN	OLCT 10
Type:	Catalytic bead sensor (pellistor measuring principle)
Measuring Range:	0-100 % LEL methane, butane, propane, or hydrogen
Material:	ABS
Signal Output:	Wheatstone Bridge	Normal operation 4-20 mA (Fault < 0.5 mA or > 23.2 mA)
Non-ambiguity Reading:	Managed by control unit	Set to 23.2 mA if value > 100% LEL according to European standard EN 61779-4 Disable on request when managed by a suitable controller
Settings:	On control unit	Without opening the enclosure by means of 2 potentiometers for zeroing and spanning 2 mA signal output in maintenance mode One dedicated connector to get a gas measurement
Power Supply:	by control unit only	15 to 30 Vdc (nominal 24 Vdc)1: I out (signal) 2: 0V 3: +24 Vdc
Maximum Power Consumption:	See user manual of the control unit	100 mA max
Output Signal:	4-20 mA	4-20 mA
Default Signal:	< 1 mA	< 1 mA
Wiring Connection:	OLC10: 3-wire, shielded, core size 1,5 mm², max. cable length 300 m. 1 cable-gland M16 (outer 4 to 8 mm) OLC 10 TWIN: Shielded, core size 1,5 mm², 3-wire to control unit, 4-wire between both sensors, max. cable length 300 m. 2 cable-glands M16 (outer 4 to 8 mm)	3-wire, shielded, core size 1,5 mm², Max. cable length 1 km if connected with control unit (32 V max in loop) 1 cable gland M16 (outer 4 to 8 mm)
Ingress Protection:	IP 66
Approvals:	Electromagnetic compatibility according to EN 50270
	ATEX II 3 G / EEx nA IIC T6	ATEX II 3 G / EEx nA IIC T4
Response Time:	T50 < 10s, T90 < 20s
Accuracy:	+/- 3% LEL
Dimensions:	118 mm x 126 mm x 58 mm (4.65" x 4.96" x 2.28")
Operating Temperature:	-10°C to 45°C (-14°F to 113°F)
Operating Humidity Range:	0 % RH to 95 % RH
Operating Pressure:	80 to 120 kPa
Expected Lifetime:	> 4 years

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

ref

description

downloads

price($)

Order Item

6513559

OLC10 Atex approved combustable gas detector 0-100% LEL, standard ranges CH4, Propane, Butane or Hydrogen. ATEX II 3 G - EEx nA IIC T6 approved

■	Data Sheet

150.00

Not Available online

Send page to a colleague