Elpro 105U-G Wireless Protocol Telemetry Modems

The 105U radio protocol is designed for very efficient radio usage, with configurable communications based on event reporting (I/O change), update times and/or poll response. Other features are:

• high security data encryption
• automatic acknowledgment and error-correction,
• peer to peer addressing, and
• mulitple path routing

The 105U-G modules also have eight on-board discrete I/O, individually configurable as input or output.

Network configuration is performed with easy-to-use free software. I/O links are configured between different modules in the network.

Ordering information:

105U-G-MD1 Modbus Master, Modbus Slave, DF1 interface
105U-G-PR1 Profibus DP Slave interface
105U-G-ET1 Ethernet IP / Modbus TCP / HTTP-FTP-Email
105U-G-DE1 DeviceNet Slave interface
105U-G-M+1 Modbus Plus Slave interface

Specifications

Power Supply

• 9 - 30VDC / 12 - 24VAC
• Battery charging circuit included for 12V back-up battery, max charge current regulated to 1A
• Normal current drain
• Modbus / DF1 version 12V 150mA; 24V 90mA
• Profibus / Ethernet 12V 270mA; 24V 170mA
• Add 5mA per active I/O
• Current drain during radio transmission - add to above
• 12V 350mA; 24V 200mA

General

• Modbus/DF1 version
     -20 to 60 degC, 0 - 99 %RH
• Profibus / Ethernet / DeviceNet / Modbus Plus
     0 to 60 degC, 0 - 95 %RH
• EMC Compliant EN55022, EN50082-1, FCC Part 15
• Housing - extruded aluminium case 130 x 185 x 60 mm, DIN rail mounting, removable terminal blocks for ease of module replacement, terminals suitable for 2.5sqmm wire
• LED indication for processor OK, radio TX and RX, serial TX and RX, active status.

I/O Capacity

• Modbus / DF1 4300 I/O points (analog plus discrete)
• Profibus 416 I/O bytes
     up to 1952 discrete inputs / 1952 discrete outputs
     or up to 122 analog in / 122 analog out
• Ethernet 2048 bytes input and 2048 bytes output
     up to 4300 discrete I/O points
     or up to 1024 analog in / 1024 analog out
• DeviceNet 512 bytes input and 512 bytes output
     up to 4300 discrete I/O
     or up to 256 analog in / 256 analog out
• Modbus Plus 2048 bytes input and 2048 bytes output
     up to 4300 discrete I/O
     or up to 1024 analog in / 1024 analog out
• Register size 16 bit
• Number of remote 105U addresses 500

Radio Transceiver

• Single channel, synthesised, direct frequency modulation.
• Frequency 405-490 MHz, 12.5KHz channels, 10-500mW, 5W
                 220-230 MHz, 25KHz channels, 5W
                 869.525 MHz, 250KHz channel, 500mW
• Approved to EN 300 220, AS4268.2, RFS29
• Expected line-of-sight range, with unity gain antennas
     10mW - 2km; 500mW - 5km(869Mz) / 10km (400MHz);
• 5W - 40km (220MHz) / 30km (400MHz)
• Range may be extended by up to four intermediate repeaters.

Radio Transmission

• Radio communications can be configured for combination of event reporting (change-of-value), update time, read/write blocks and poll response.
• Radio message includes system addressing, unit addressing, error-checking and configurable security encryption.
• Communication control includes message acknowledgments and up to four re-transmissions.
• Peer to peer addressing. Messages may be routed thru four intermediate repeater addresses.
• Fail-to-transmit and fail-to-receive alarms configurable

Modbus Specification

• Modbus RTU (binary), master / slave configurable.
• RS232 or RS485, 300 - 19200 bits/sec.

DF1 Specification

• Allen-Bradley DF1 full-duplex.
• RS232 only, 300 - 19200 bits/sec.

Profibus

• Profibus-DP Slave functionality according to EN 50170.
• RS-485 optically isolated with on-board DC/DC converter, automatic baudrate detection (9600 bit/s - 12 Mbit/s)

Ethernet

• 10/100 Mbit/s, RJ45 transformer isolated interface
• Modbus/TCP class 0, class 1 and partially class 2 slave
• EtherNet/IP level 2 I/O Server
• Embedded Web system (Dynamic HTTP), on-board file system (1.4MB flash disc), user downloadable web pages through FTP server, Email functionality (SMTP)

DeviceNet

• DeviceNet 2.0 Slave, optically isolated RS422 with selectable baudrate 125, 250 and 500 Kbit/sec.

Modbus Plus

• Modbus Plus Slave, optically isolated RS485 with standard baudrate of 1 Mbit/sec, global data base transactions with routing for up to six networks.

On-board I/O

• Eight discrete I/O, individually configurable as input or output. Inputs suitable for voltage free contacts.
• Outputs are FET, 30VDC 500mA.

Configuration & Diagnostics

• Configuration via free Windows software
• Diagnostics include on-line read/write of I/O registers, radio signal strength values from remote units, and off-line testing of data bus protocol.

ref

description

downloads

price($)

Order Item

ELP-105U-G-MD1

Elpro 105U-G-MD1 radio telemetry unit, with modbus communications, 8 x digital I/O channels, power supply 240vAC or 12 - 30 vDC, 150mA Idle 350mA transmitting.

1560.00

Not Available online