Eesiflo EASZ5000 Ultrasonic Flowmeter . For permanent installations, with external clamp on probes for pipe sizes 10mm up to 5 metres diameter. Unit is fully programmable for various pipe sizes, pipe material and liquid types. The wall mount controller displays flow rate and flow total and has a 4-20mA outp for flow rate, and two pulse outputs for flow total. Dual channel version also available - model EASZ5200
Ultrasonic flowmeter in IP 66 wall mounted enclosure
-
Easy to install clamp-on sensors with no process interruption
-
Non-invasive flow measurement of liquids, no pipeline disturbance, no pressure loss
-
Suitable for all commonly used pipe materials with pipe diameters from 10 mm to 2.5 m (1/2" to 100")
Description
The EESIFLO 5000 Series range of non-invasive flowmeters utilises ultrasonic technology for the accurate flow measurement of liquids in full pipes.
The field mounted flow transmitter can be configured via the keypad without any additional programming devices and is available as single channel unit.
The measurement of flow is based on the principle that sound waves are influenced by a flowing medium.
Measurements are made by penetrating the pipe with ultrasound and subsequently time differences, frequency variations and phase shifts of the ultrasonic signals are evaluated. This measuring technique has no effect on the flowing liquid. There is no pressure loss in the pipe and no wear on components of the measuring device.
The ultrasonic sensors are clamped onto the outside of the pipe, thus eliminating the need to dismantle the pipework and interrupt the process. The EESIFLO 5000 Series can be applied to any type of standard pipe carrying clean or dirty liquids.
Advantages
Low installation effort and costs
Measurement is independent of fluid conductivity and pressure
No pressure loss, no possibility of leakage
Retrospective installation for existing plants possible
No cutting of pipes necessary, no interruption of process, no plant shut down
No additional fittings for maintenance required
Hygienic measurement, no risk of contamination, suitable for ultra clean liquids
No contact with medium, no risk of corrosion when used with aggressive media
Cost advantages when used with large diameter pipes, high pressure systems, etc.
Low stocking costs, nearly all pipe sizes are covered with only 2 types of sensors
For further information,
technical advice, or a
quotation please call or
email
us. If you are not sure which
product you need one of our
technical sales advisors will be
happy to discuss your
application. We also accept
company purchase orders by fax
or post. Credit card orders can
also be placed over the phone
for any product.
ref
description
downloads
price($)
Order Item
EASZ5000-M
5000 Series, ultrasonic flowmeter, power supply 100-240 VAC, 1 X 0/4-20mA O/P, 2 X open collector O/P. Set of transducers 100mm to 2500mm (-30 to 130 degc) with 10M cable and steel mounting straps, Acoustic Couplant and Instruction Manual.
Tel +44 (0)
845 9000 601 Fax +44 (0) 845 9000 602
info@omniinstruments.co.uk
Tel +1-866-849-3441
Fax +1-866-628-8055
info@omniinstruments.net
Tel +61 (0)282 442 363 Fax +61 (0)294 751 278 info@omniinstruments.com.au
Basket
