The Series 6 capsules are of all welded stainless steel construction, with integral media isolation diaphragm. No 'O'ring seals are used. The Series 6 uses a silicon TAB sensor mounted in the oil filled stainless steel capsule, providing a highly stable measuring cell with negligible hysteresis, high output signal and a life of millions of pressure cycles.

TAB (Tape Automated Bonding) is a flexible printed circuit system for interconnection between the silicon sensor and the capsule output pins, offering improved reliability and significantly lower production costs.

Series 6 is a low cost sensor for OEM use, tested for function only, with no calibration data supplied. Series 6T is supplied tested, with calibration certificate: Linearity, sensitivity, zero point, temperature coefficients 0...50°C and compensation resistor values (resistors not supplied).