Welcome to Omni Instruments!

omni Menu

Load & Torque Sensors

Items 31 to 40 of 47 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. CDF

    CDF Miniature Button Load Cell

    $425.00

    The CDF series of miniature button load cells are designed for compression measurement applications where the absolute minimum of space is available for transducer mounting.

    With capacities from 500N to 2000N available measuring just 15mm in diameter and 8mm in overall height, the CDF is the smallest button load cell that we offer.

    Learn More
  2. CCG

    CCG Annular Load Cell

    $468.00
    The CCG series of low profile annular load cells (also known as donut load cells) have been designed for applications where bolt tension needs to be measured with a very low-profile transducer. They are also used in cable tension applications where they are mounted at the anchor point. Learn More
  3. CCD-0.1%

    CCD-0.1% High Accuracy Column Load Cell

    $920.00
    The CCD-0.1% series of high accuracy column compression load cells are designed for use in applications where precise measurement of mid to high loads and forces is required. Learn More
  4. CCD-0.25%

    CCD-0.25% Column Compression Load Cell

    $766.00

    The CCD series of column load cells are design to make compression load measurements in a wide range of heavy duty mid to high capacity applications such as pile force measurement, press testing and hydraulic jack levelling systems.

    Standard capacities for the CCD column load cell range from 2 tonnes up to 1000 tonnes with even higher capacity versions up to 3000 tonnes possible.

    Learn More
  5. DBBSMM

    DBBSMM Miniature S-Beam Load Cell

    $396.00

    The DBBSMM series of miniature S-Beam load cells are suitable for use in tension and compression and lend themselves to both force and load measurement applications where the space to mount a standard size load cell is not available.

    All of our miniature S-Beam load cells offer high accuracy of better than ±0.03% of their rated capacity and can be optionally gel-filled to provide a waterproof device suitable for applications such as wave tank monitoring.

    Learn More
  6. DBEP

    DBEP Shear Pin Load Cell

    $595.00

    The DEBP series of shear pin load cells are suitable for the measurement of tensile and compressive forces across a huge range of process monitoring, offshore, civil engineering, industrial, marine and crane/lifting applications.

    All of our pin load cells are manufactured from stainless steel and sealed to IP67 as standard to ensure that they are able to stand up to the tough conditions that are commonplace in a typical industrial, marine or offshore application.

    Learn More
  7. DDE

    DDE Miniature In-Line Tension & Compression Load Cell

    $429.00
    The DDE's small size means that weight is kept to a minimum, this, in conjunction with it's low deflection, results in a high stiffness assembly and makes the load cell suited to the measurement of fast changes in load and high frequency transients. Learn More
  8. UF1

    UF1 Isometric Force Sensor

    $343.00

    The UF1 isometric force sensor design provides a high output sensitivity of 4mV/V along with very high overload capacity of 2500 grams on all ranges.

    Learn More
  9. OBU Series

    OBU Single Point Moment Insensitive Load Cell

    $155.00
    Ranges 0.5kg to 1000kg, Output 2mV/V, Accuracy ±0.03%, Sealed to IP65 Learn More
  10. ET Telemetry

    ET Telemetry Lift Link

    $2,895.00
    The ET wireless crane scales utilise a battery-powered radio telemetry system to allow wireless load measurement over distances up to 200 metres, avoiding the need to run vulnerable cables across your site and ensuring that personnel can easily stand at a safe distance during weighing and lifting operations. Learn More

Items 31 to 40 of 47 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5