Shuttle is an advanced microprocessor based ultrasonic level meter with a newly developed, intelligent, precise measuring system utilising the latest hardware and software technology. Shuttle provides simple and logical operation, using advanced technology resulting in a high quality product at a competitive price price. Shuttle is designed to measure water levels as well as other fluids and aggressive media, where the ultrasonic sensor is not in contact with the media.

• Ultrasonic measuring system with measuring ranges from 10cm to 15 meters.
• Learning function allows the Shuttle level transmitter to learn how the tank is arranged with piping, pumps and other items that might disturb the measurement. The system also ignores turbulence and electrical interference, so even a slow moving mixer can pass through the ultrasonic beam without any influence on the measurement.
• 2 output relays for level / system alarm or pump control with duty and standby cycles.
• 4-20mA output with zero and span adjustment.
• Indication of the strength of the echo signal with bargraph.
• Very narrow ultrasonic pulse signal gives great signal strength and minimum sensitivity to foam and sludge on the surface of the liquid.
• Easy to read LCD-display for both setup and indication. Actual level is indicated with both a bargraph and with digits in millimeters, centimeters, meters, feet and inches. The digital readout can be chosen as either relative level or absolute level.
• 10 - 30V DC or 230 / 115V AC supply.
• Intrinsically safe ultrasonic sensor (CENELEC Zone 2)

Shuttle needs no operation after initial setup. Nine function buttons behind the front panel are used to configure:

• Unit selection in either meters, centimeters, millimeters, feet and inches.
• Adjustment of zero level of the measurement and selection of relative and absolute referance.
• Zero and span for the mA output.
• Function for the two output relays - off, level alarm, system alarm or pump control with alternation.
• Learning function, so the level meter recognizes how the wetwell is arranged with pumps, piping and other disturbing elements. The measurements will not be effected by false echos.

Shuttle is equiped with two output relays which can be configured for level or pump control, system alarm or level alarm. The relay function can be set to NO or NC contact with an optional delay function. The relays can be used for start and stop of pumps with alternation.

Applications

Shuttle is well suited for any ultrasonic level measurement. The level transmitter may also be used for measuring and control of levels in tanks with contaminated and/or aggressive media.

Typical applications is measurement and control in:

• stormflow tanks
• pump stations
• tanks in sewage treatment plants
• tanks in water plants
• tanks and vessels in process and provisions industries

Specifications

pdf Datasheet Ex stock. Budget Price £520.00