|
|
Data Sheets & Links
|
|
 |
Monoscan Ultrasonic Level Transmitter,
for liquid level, solids level and open channel flow, non contact measurement,
Monoscan has
a range of up to 15 m (49.21 ft) and an accuracy of 0.25% within
that range. There is a choice of either Parylene coated Aluminum
sensors (customarily used in solid applications and with a high
sensitivity to echoes) or Stainless Steel, predominantly for liquid
application.
TheMonoscan
is probably the smallest ultrasonic solution
on the market for open-channel flow applications. Unit has digital
LCD display, 2 wire 4-20mA output and optional 4 wire RS485 output.
Certified EEx ia IIC T4.
Ex Stock. Budget Price £395.00
|
|
|
|
 |
Smartscan Ultrasonic Level Transmitter, easy to install, non contact level measurement,
Smartscan is available with ranges up to 40 metres and an accuracy of 0.25% within that range. There is a choice of either Parylene coated Aluminum sensors (customarily used in solid applications and with a high sensitivity to echoes) or Stainless Steel, predominantly for liquid application.
Ex Stock. Budget Price £800 + |
|
More Info
Pdf Datasheet |
|
 |
Shuttle Ultrasonic Level Transmitter, easy to install, non contact level measurement, 10cm to 15m measurement range, 1mm accuracy, digital display, analogue 4-20mA and 2 relay outputs.
Ex Stock. Budget Price £520.00
|
|
|
|
 |
Model FT8511
Magnetostrictive Level Transmitters. These rugged, high
accuracy all stainless steel level transmitters are ideal for
monitoring tanks, silos for liquid level of a wide rang of media
including, water, waste water, chemical addition products,
refrigeration liquids, fuel oil, diesel, solvents etc. Units can
be supplied with probe lengths from 100mm to 6 metres for
operating temperatures in the range -40 to + 100 degrees C with
2 wire 4-20mA output. Accuracy is <0.025% of span, with
resolution of <0.016% FS or 1.5mm. Measurement is unaffected by
liquid foaming. For hazardous areas Exia II BT5 certification is
available.
Budget Price £375
+ |
|
|
|
 |
Model UFI7P00 RF
Admittance Point Level Switch. Capacitance probe for level
detection, ideal for:
Liquid: conductive or insulating liquid
( includes
liquefied gases )
Slurry: conductive or insulating slurry
Granular: food、plastics、coal
etc
Interface: two liquid interface under different K
Powder: plastics powder、cement、fly
ash etc
3 sensitivity settings from 1 pf to 5 pf
Units can
be supplied with probe lengths from 0.5 to 20 metres for
operating temperatures in the range -40 to + 70 degrees C with
2 DPDT realy contacts rated at 250VAC 1 amp. Power supply
90-250VAC or 19-35VDC. Repeatability is <1mm conducting or
20mm insulating. Response time is <0.5 sec or with programmable
delay 2-55 secs. Measurement is unaffected by
liquid foaming. For hazardous areas
Exd[ia]iaIICT4 certification is
available.
Budget Price £250
(quantiy discounts available ) |
|
|
|
 |
Level transmitters, Ranges 0 - 100mm WG to 0-200M
WG, accuracy +/- 0.2% Options: programmable, digital indicators,
submersible. |
|
|
|
 |
Remote Level Loggers for borholes,
rivers, open channels etc.Stores up to 21,000 readings with information
downloaded via simple windows software. Results can be viewed
graphically and imported into other applications. Data can be
retrieved by direct connection to a PC or by GSM/PSTN/radio modem.
|
|
|
