DataTaker multi-channel, universal input, 16 an 18 Bit data loggers. These highley versitile loggers are suitable for a wide range of data logging applications and come with powerful, user friendly Windows software. Real time and downloaded data can be viewed in graph and table format and be exported to Excel. All loggers support the following input types, RTD, Thermocouple, 4-20mA, millivolt, voltage, frequency, thermistor, strain gauge, resistance, pulse and digital. Loggers have up to five digital outputs. On the DT500/600 models, up to two channel expansion models can be added to give extra digital and analogue I/O.

• DT50 10 analogue inputs and 5digital I/O
• DT600 30 analogue inputs and 4 digital I/O, with built in display
• DT605 As DT600 but with high voltage input range (+/- 100vDC)
• CEM Channel expansion module expands the capacity of the DT600/605 by 30 analogue inputs, 20 digital inputs and 10 digital outputs

• DT800 logger offers high speed logging and very large memory capacity using standard PCMCIA flash memory cards.
• 42 analogue inputs, 16 digital I/O, 1 RS232 input, 1 analogue output, fast logging rates, 200Hz normal mode or 100Khz burst mode
• All loggers maybe connected via direct RS232, radio or GSM modem or Ethernet
  

Portable Ocillagraphic Chart Recorder

This state of the art data acquisition recorder is ideal for site investigations where fast transients need to be captured such as power disturbance problems or machine start up/run down applications. The real time graph display and thermal chart enable immediate analysis of results and stored data can be downloded to a PC for indepth analysis and creation of reports etc.

As the unit is small, lightweight and battery powered it can easily be moved from site to site.

The unit has four analog high voltage inputs suitable for direct measurement of mains AC signals. Powerful trigger functions such as wave window, edge and time-out trigger make possible the acquisition of mains disturbances, interruptions, unbalance and other abnormalities in the waveform of a commercial frequency power supply. 

Three different operating modes are available: real-time, memory and harmonic mode. Additionally, the harmonic trigger is a key feature for the simple detection of heat and vibration losses in machines, transformers, and installations, to just name a few possibilities.

There are many powerful analysis functions such as Root Mean Square, content and phase angle for harmonic of each order, active power, reactive power, which are performed automatically.

One of the main highlights of the SE 540 is the automatic fax transfer via modem card or storage on a PC flash card for long-term recording. Stored data are easy to transfer to spreadsheet applications.

Features

• Ergonomically, compact and lightweight 
• Optimized for field applications 
• 4 analog inputs for AC or DC measurements 
• Voltage measurements up to 1000V DC and 500Vrms 
• 8 additional digital inputs (high voltage probes in option) 
• Up to 400k samples per channel (11 bits resolution) 
• Real - time and/or memory recording mode 
• Harmonic analysis 
• Powerful trigger functions (wave window trigger ...) 
• Clear display with backlight 
• Integrated thermal printer (100 mm paper width) 
• PC card slot supporting flash memory and modem/fax cards 
• Standard Supply: Internal alkaline batteries 
• Supplied with AC adapter
• NiMH battery powered

MX2100 Multigas portable gas detectors for Flammable, Oxygen (O2), Carbon Monoxide (CO) and Hydrogen Sulphide (H2S) gas.

MX 2100 Multigas meter is a small robust unit, providing simultaneous detection of 4 gases, with graphical LCD display , instantaneous STEL-TWA alarms, long battery life, data logging and printout, and library of 32 preset flammable gases. Hire units are supplied with leather cases, mains chargers and optional flexible sample probes. All units are checked with test gas and issued with a test certificate prior to despatch.

*Prices quoted are for short term hire up to 4 weeks. Please contact us for a competitive quote for long term hires. Carriage will be charged extra at cost.

This multi-purpose anemometer is ideal for measuring air flows in ducts, HVAC systems, extraction systems, etc. Small probe requires only 16mm diameter entry hole in ducts, etc. Unit has programmable averaging facility and analog output for a data logger.

• Easy handling, convenient keys
• Mean-, Minimal- and Maximum values callable
• Free selectable measurement time from 2 seconds to 2 hours
• Analogue output 0-1V

EESIFLO EASZ-10FP Portable Handheld Flow Meter
Battery or mains powered clamp on ultrasonic flow meter, measure flows without breaking in to the pipe. Ideal for site investigations, built in data logger stores 55,000 flow readings. Supplied complete with thickness gauge, probes, mounting straps and waterproof carry case. Suitable for measuring most liquid flows on pipe sizes 1/2" to 40" (12mm to 1000mm).

• Extremely easy to install clamp-on sensors with no process interruption
• Non-invasive flow measurement of liquids, no pipeline disturbance, no pressure loss
• Suitable for all commonly used pipe materials and all sonically conductive liquids
• Integrated wall thickness measurement as standard

*Prices quoted are for short term hire up to 4 weeks. Please contact us for a competitive quote for long term hires. Carriage will be charged extra at cost.

We also able to conduct onsite flow surveys with full reports in printed and Excel format - call us for details.

EESIFLO EASZ-10P Portable Handheld Doppler Flow Meter
The EESIFLO EASZ-10P is a handheld non -invasive microprocessor based meter for measuring the flow rate and total volume of liquids in pipes, including aerated water, liquids containing suspended solids, slurries and sludges. The EESIFLO EASZ-10P requires fluids with a minimum concentration of 100 ppm of solids or bubbles having minimum size of 100 microns and works on most pipes 2 inches and above. The flowmeter utilises the non-intrusive Doppler principle to measure the mean velocity and is particularly useful as a temporary flow indicator or as a working tool to establish flow conditions in field or plant installations.
Applications include: slurries, dredging, pulps, primary sludge, digested sludge, thickened sludge, waste activated sludge and return activated sludge.

• Microprocessor controlled
• Programmable
• Easy to use
• Flow total and rate display

EASZ-10P Data Sheet

EASZ10-P Manual

Complete Remote Weather Station, for wind speed, direction, temperature, barometric pressure, humidity, rain fall, solar radiation, etc. Supplied complete with data logger, data can be downloaded to laptop computer, iPaq or over the GSM network using the optional GSM modem. Data can be viewed and graphed by using a program such as Excel.