|
Gyros,
Accelerometers & IMU's Visit this page on our new web site
|
Data
Sheets & Links
|
|
 |
TriRate - Triaxial
Gyro
TriRate is a triaxial MEMS angular rate sensor (gyro) designed for
OEM customers that require a 3D (triaxial) gyro in a miniature size.
The TriRate MEMS gyro can easily be incorporated into existing
designs requiring general-purpose triaxial angular rate
measurements. The TriRate product provides analogue
angular rate and reference outputs for each of the 3 axes in
addition to a temperature signal for rate offset compensation.
Displacing only 2.5 cubic cm, the TriRate gyro allows inertial
system designers to rapidly incorporate triaxial angular rate
sensing capabilities in the smallest possible system size. Standard
dynamic range configurations of 150, 300 and 1200 deg/sec are
available, while custom ranges are available upon request.
Budget Price £649
qty
discounts POA
Ex Stock
 |
|
Available to our customers in the UK, Europe and Australia
For sales in other areas click here
MEMsense
TriRate Data
Sheet
TriRate More
Info |
|
|
AccelRate3D - Triaxial
Accelerometer and Gyro
The AccelRate3D Sensor is the world’s smallest analogue
inertial measurement unit, providing outputs of triaxial
acceleration and triaxial angular rate (gyro). AcceleRate3D product
suite is capable of sensing between 150 - 1200 °/s angular rate and
2 - 5g acceleration about 3 axes. AccelRate3D provides analogue
outputs for angular rate, acceleration and precision references
about the X, Y, and Z-axes. A temperature output is also provided
allowing the implementation of compensation techniques. A digital
self-test input electromechanically excites each axis to test proper
operation of the sensors and the signal conditioning circuits. The
AccelRate3D based on MEMS technology and is available in a custom
44-pin SMT package measuring 18 ×
18 × 10 mm
Budget Price £815
qty discounts POA
Ex Stock
|
|
AccelRate3D Data Sheet
AccelRate3D More Info |
|
|
MAG3 - Triaxial
Magnetometer, Accelerometer and Gyro
The MAG3 sensor provides analogue outputs
of triaxial magnetic field, acceleration and angular rate (gyro).
The MAG3 product suite is capable of sensing +/-1.9 gauss, +/-150 -
1200 °/s angular rate and +/-2 - 5g acceleration about three axes.
MAG3 provides analogue outputs for angular
rate, acceleration and precision references about the X, Y, and
Z-axes. A temperature output is also provided allowing the
implementation of compensation techniques. A digital self-test input
electromechanically excites each axis to test proper operation of
the sensors and the signal conditioning circuits. The MAG3 is based
on MEMS technology and is available in a custom 44-pin SMT package
measuring 18 × 18
× 10 mm.
Budget Price £885
qty discounts POA
Ex Stock
|
|
MAG3
Data Sheet
MAG3 More Info |
 |
µIMU - Micro Inertial
Measurement Unit
The µIMU provides serial digital outputs of triaxial acceleration,
rate of turn (gyro) and triaxial magnetic field data. The IMU
acquires its data from reliable MEMS sensors housed within the ultra
rugged aluminum housing. Digital outputs can be configured to RS232,
RS485, RS422, SPI or I2C protocols. Custom algorithms provide high
performance, temperature compensated, triaxial inertial data in real
time. The µIMU is available in a custom package measuring
56mm. diameter × 20mm.
height. Front and back mounting options are available.
Budget Price £1795
qty discounts POA
Ex Stock |
|
µIMU
Data Sheet
µIMU More Info |
 |
nIMU – Nano Inertial
Measurement Unit
The nIMU is the newest addition to the MEMSense inertial product
family and is the world’s smallest processor based inertial
measurement unit. The nIMU offers I2C digital temperature
compensated outputs of triaxial angular rate, acceleration, and
magnetic field data. The nIMU can be integrated into a printed
circuit assembly via a simple 4-pin connector providing
communications and power. The IMU measures 46
x 23 x 13 mm and
is available now.
Budget Price £1285
qty discounts POA
Ex Stock
|
|
nIMU
Data Sheet
nIMU More Info |
 |
The MIDG II INS/GPS
The
Microbotics MIDG
II is an Inertial Navigation System (INS) with Global Positioning
System (GPS) contained in an incredibly small package. This INS GPS
package is ideally suited for any RC or UAV application that
requires an inertial navigation solution. The MIDG II INS/GPS
package is specifically designed to be used with the
Microbot Autopilot, but can also be
used with other autopilot packages for primary instrumentation.
Product Features
- Differential Ready GPS; WAAS/EGNOS
compliant
- Power In: 10 to 32 VDC, 1.2W
maximum
- Hardware filters provide
vibration immunity
- Advanced filter algorithms for
exceptional performance
- GPS measurements at 5Hz
- INS solution (position,
velocity, and attitude) at up to 50Hz
- INCLUDED: Software
(display and configuration utilities), and
mating connector
Budget Price £3995
|
- Size:
38 x 40 x
22mm
- Weight: Under 55 grams
- 3-Axis Rate Gyro
- 3-Axis Accelerometer
- 3-Axis Magnetometer
|
|
MIDG II INS/GPS More Info
MIDG II INS/GPS Data Sheet
Additional Products
Microbot Autopilot
Servo Controller
Dual Barometer Module
Dual Channel Serial Converter
|
 |
Model
31206A and 31207A Triaxial Rate Gyros
These solid state MEMS gyros are
available in multiple rate ranges to cover a variety of
applications. Model 31206A can be ordered with a rate ranges of
either ±150°/sec, ±300°/sec, or ±600°/sec, while model 31207A
provides a ±1200°/sec range. Both models feature a wide 100 Hz
bandwidth. Fully temperature compensated with an
operating range of -40 to + 85 deg C. This unit is
available as a custom solution for volume
applications. NIST calibration with
certificate included. Built-in self-test verifies proper sensor
operation and wiring connections.
Budget Price £850
|
|
Model 31206A Data Sheet
Model 31206A More Info
Model 31207A
Data Sheet
Model 31207A More Info |
 |
13200B/13202B Series Single Axis General Purpose MEMS Accelerometers
ranges +/- 1 to +/- 40g.. With frequency response DC - 4 to DC - 1000
Hz., 8-30 volt DC supply and DC O/P 0.05 to 4.95 VDC these units are easy
to interface with displays, data loggers etc. without further signal conditioning.
Supplied in rugged aluminum housing with terminal block or flying lead.
Ex Stock - Budget Price £179
|
|
13203B
Series More Info 13200B
Series More Info
13203B
Series Data Sheet
13200B
Series Data Sheet
Accelerometer
Mounting Adapter
Accelerometer
Mounting Adapter Data Sheet
|
|
|
23200B Series Dual Axis General Purpose MEMS Accelerometers
ranges
+/- 1 to +/- 40g.. With frequency response DC - 4 to DC - 1000 Hz.,
8-30 volt DC supply and DC O/P 0.05 to 4.95 VDC these units are easy to
interface with displays, data loggers etc. without further signal conditioning.
Supplied in rugged aluminum housing with terminal block or flying lead.
Ex Stock - Budget Price £249
|
|
23203B
Series More Info 23200B
Series More Info
23203B
Series Data Sheet
23200B
Series Data Sheet
Accelerometer
Mounting Adapter
Accelerometer
Mounting Adapter Data Sheet
|
 |
34200A Series Triple Axis
General Purpose MEMS Accelerometers
ranges +/- 1 to +/- 40g. With
frequency response DC - 4 to DC - 1000 Hz., 8-30 volt DC supply and
DC O/P 0.05 to 4.95 VDC these units are easy to interface with displays,
data loggers etc. without further signal conditioning. Supplied in rugged
aluminum housing with flying lead.
Ex Stock - Budget Price £695
|
|
34203A
Series More Info 34200A
Series More Info
34203A
Series Data Sheet
34200A
Series Data Sheet
Accelerometer
Mounting Adapter
Accelerometer
Mounting Adapter Data Sheet
|
 |
1/2/35203A Series Smart
Accelerometer Systems
are complete, easy-to-use, user-configurable
Acceleration Measurement Systems containing one, two or three accelerometers,
a temperature sensor, signal processor, IRIG-106 PCM encoder, RS485
interface and three analog outputs in a small, easy-to-install package.All
channels are sampled simultaneously to avoid data skewing. The digital
signal processor takes 16-bit samples, filters, ranges, and calibration
compensates at up to 42,500 samples/sec/channel. Digital data can be
streamed out at up to 3 Mbit/sec.The output range, filter frequency
and calibration of each channel, as well as telemetry configuration,
can be set by the user via the RS485 command processor. CRC-16 error
checking is used to ensure command and data integrity.The built-in temperature
sensor can be used by critical applications to correct for any residual
temperature effects.
Budget
Price £595 |
|
|
 |
Schaevitz high precision closed loop servo accelerometers. Ranges ±0.25g to ±30g, with 0.05% linearity, and +/-5vDC output. This type of accelerometer is suitable for applications such as:
|
- data acquisition systems
- crash recorders
- fatigue life monitoring & prediction for stabilising platforms on space & ship- borne satellite tracking systems
- monitoring and controlling deceleration in mass transit systems
- road bed analysis
- fault detection equipment for high speed railways
- military and civil flight simulators
- autopilots and low frequency vibration monitoring
|
A215/220 Accelerometer Data Sheet
A215/220 More Info
|
 |
Accustar Electronic
Inclinometer. Solid state capacitance device for
angle measurement up to +/- 60 degrees. This small, rugged, light weight device provides high accuracy (+/-0.1°) angle measurement at a reasonable cost. The Accustar II is also available
for dual axis tilt measurement in the range
of +/- 20°
Budget Price Single Axis £169, Dual Axis £ 159
Ex Stock
|
|
|
 |
The LSO Series is a high precision inertial referenced closed loop tilt sensor for commercial and military applications, ranges +/-1° to +/- 90°. Sensors are available with a +/-5v or 4-20mA output, with accuracy of 0.05° . |
|
LSOP/LSOC Data Sheet
LSOP/LSOC More Info
|
