Triaxial Rate Gyro
±150, ±300, ±600°/sec Ranges
< ±6°/sec Offset Stability
-40 to +85°C Temperature Range
Technical Data*
Features and Benefits
High Accuracy and Linearity over Wide Temperature Range
The voltage output for each axis of the 31206A is directly proportional to
the rotational rate along that axis. Each DC-coupled output is fully scaled,
referenced, and temperature compensated. Accuracy is improved by
minimizing variations due to temperature and aging effects, resulting in a
sensor that is stable over temperature.
Calibration Certificate
Each 31206A is supplied with a calibration certificate listing gain, offset,
and on-axis and transverse alignment parameters needed to ensure rapid
and efficient system implementation. The alignment data can be used to
compensate the measured values to achieve an even higher level of
sensor accuracy.
Self-Test on Digital Command
A TTL-compatible self-test input causes a simulated rotational rate to be
injected into all three sensors to verify channel integrity.
Small Size
Complete conditioned triaxial rate gyro in less than a cubic inch.
Built-in Power Supply Regulation
Unregulated DC power from +8 to +36 volts is all that is required to
measure accelerations on all axes.
Suitable for Harsh Environments
The 31206A is robust and can be used in harsh environments. The unit
will survive 2000 g powered and unpowered.
Three Year Warranty
Summit Instruments 31206A Triaxial Rate Gyros are covered by a three
year return to factory warranty.
*Preliminary, Data subject to change without notice
Precisely Measure
Real-World Rates
The Summit Instruments 31206A Triaxial
Rate Gyro is capable of sensing angular
motion around three orthagonal axes. Fully
temperature compensated analog outputs
are available for the X, Y , and Z axes.
Unregulated +8 to +36V DC power is all
that is required to measure ±150°/sec ,
±300°/sec, and ±600°/sec rotational rates,
on each of three axes.
Each axial sensor has been tested over the
-40 to +85°C temperature range and has a
nominal full scale output swing of ±2 volts.
The zero rate output level is nominally +2.5
volts. Precise values for each axis are
available on the calibration certificate.
Custom versions of the 31206A can be
provided for applications which require
different ranges and/or bandwidths.
31206A
UK / Europe Office
Tel: +44 (0)8700 434040
Fax: +44 (0)8700 434045
info@omniinstruments.co.uk
East Kingsway Business Centre
Mid Craigie Road,
Dundee DD4 7RH UK
Australia / Asia Pacific Office
Tel +61 (0)894 888 960
Fax +61 (0)894 888 965
info@omniinstruments.com.au
PO Box 105, Leederville
Western Australia, 6902
www.omniinstruments.com.au
www.omniinstruments.co.uk
US/Americas Office
Tel +1-805-473-2818
Fax: +1-866-628-8055
info@omniinstruments.net
PO Box 84, Arroyo Grande
California, 93420, USA
www.omniinstruments.net