Welcome to Omni Instruments!

omni Menu

Omni Eco Line OMNI-TUF-200F Fixed Ultrasonic Flow Meter

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Omni Eco Line OMNI-TUF-200F Fixed Ultrasonic Flow Meter

Omni Eco Line 200F Ultrasonic Flow Meter

Be the first to review this product

Availability: Stock Item

$995.00

Quick Overview

The Omni Eco Line 200F is a low cost clamp on ultrasonic flow meter is ideal for long-term deployment for flow measurement and closed-pipe applications, such as liquid process control, water flow measurement (hot/chill water, city water, sea water), sewage and sludge measurement, and measurements of oil (crude/diesel/fuel), chemicals (alcohol, acids, etc.), beverage, and many other liquids.

The Omni Eco Line 200F Wall Mount Ultrasonic Flowmeter supplied with transducers for pipe sizes 15-100mm or 100 - 700mm, complete with manual and stainless steel straps.

Features:

  • High accuracy. Normally, ±1%. When on-site calibration available, ±0.5%.
  • Wide flow range 0.03 to 105ft/s.
  • Wide pipe size range (from 1" to 240").
  • Noninvasive. No pipe disturbance. No moving parts, no pressure drop.
  • Easy and economical installation. No cutting pipe, non drilling hole.
  • Suitable for all commonly used pipe materials
  • Easy to use and set up. Self-explanatory menu programming
  • Velocity, volumetric and totalized flow
  • Ideal for both clean and opaque liquid flow measurements
  • Built-in Data Logger with 4GB SD Card

 

Specification
Linearity 0.5%
Repeatability 0.2%
Accuracy Normally better than ±1%. Could be ±0.5% with on-site calibration.
Response Time 0.5 Seconds
Display Backlit LCD 2x20 Characters.
Display instantaneous flow rate, accumulated flow rate (positive, negative and net rates), velocity, time, analog inputs, etc.
Units English (U.S.) or metric
Signal Outputs Current output: 4-20mA or 0-20mA. Impedance 0-1k
  OCT output: pulse signal for accumulated flow rate (positive, negative and net rates); frequency signal for instantaneous flow rate (0-9,999Hz selectable)
  Relay: output 20 signals, such as no signal, reverse flow & more
Signal Inputs 5 channel analog signal inputs (for signals such as temperature, pressure, liquid level, etc.)
Data Logger Automatically record the following information:
1) The totalizer data of the last 64 days / 64 months / 64 years
2) The power time and corresponding flow rate of the last 64 times power on and off events
3) Allow manual or automatic flow loss compensation
4) The instrument working status of the last 64 days.
Computer Interface RS232 & SD Card
Enclosure Protection Class: IP65 (NEMA 4X)
Liquids Type: Virtually all commonly used liquids (full pipe)
Temperature: 22˚F - 212˚F (-30˚C - 100˚C)
Concentration: <10,000ppm and small air bubble concentration
Pipe Sizes: 0.5" - 240"
Materials: All metals, most plastics, fiber glass, etc.
Pipe Length: Better longer than 15D, where D is pipe diameter. If a pump is near, the straight pipe section following the pumps should be > 30D
Cable Shielded transducer cable. Standard length 15ft (5m). Can be extended to 1640ft (500m). Contact the manufacturer for longer cable requirement. Cable should not be laid in parallel with high-voltage power lines, neither should it be close to strong interference source such as power transformers.
Power 8 to 36VDC, 80 to 265VAC optional with PSU

Normal operating temperature -40°C to +90°C, high temperature units up to +140°C

  •    

* Required Fields

$995.00

Product Attachments

View FileOMNI-TUF-200F    Size: (1.2 MB)
View FileOmni Eco 200F - Getting Started    Size: (400.7 KB)