Welcome to Omni Instruments!

omni Menu

Flow Meters

Items 1 to 10 of 19 total

per page
Page:
  1. 1
  2. 2
  1. MiniAir20 Display Unit

    MiniAir 20 Portable EX Vane Anemometer with Display

    $1,961.00
    Intrinsically safe MiniAir20 Multi-purpose propeller anemometer with various probes for standard and special applications with automatic probe recognition. In addition to the flow probes another set of probes for the parameters humidity, revolutions and volume can be handled by the MiniAir 20. Learn More
  2. FS5000 Series Flow Switch

    FS5100 & FS5700 Flow Switches

    $398.00
    The FS5100 and FS5700 flow switches are designed for liquids or gases for higher flow ranges - adjustable set points 0.5 to 18 litres per minute for liquid, or 1 to 700 slpm for gas. Hazardous area optional and with operating pressures of up too 68 bar, the FS5000 series are suitable for a variety of critical flow monitoring applications. Learn More
  3. FS6700 & FS6200 Miniture Flow Switch

    FS6200, FS6700 & FS6900 Micro Flow Switches

    $315.00
    The FS6200, FS6700 and FS6900 are designed to detect increasing and decreasing flow rates of liquids in critical processes. The linear, high resolution adjustment allows for precise settings. . Fully field adjustable set points of 0.5ml/min to 800 ml/min for liquid or 30 sccm to 20 slpm for gas with 1/8" & 1/4" NPT process connections. The FS6900 is a high temperature gas switch design to operate up too 300°F Learn More
  4. Omni Eco 2 In-Line Ultrasonic Flow Meter

    Omni Eco 2 Ultrasonic Flow Meter

    $395.00
    Easy to use, non-invasive flow sensor suitable for flow rates up to 25 litres per minute with an accuracy as high as 3%. Configurable output for 0-5V DC, 4-20mA and pulse, the Eco 2 only requires a 7.5 to 26VDC supply and uses just 10mA. A standard 3/8" BSP mounting thread, the meter can be connected directly to your line without any complex mounting methods. Learn More
  5. AV-DSP Airflow Probe

    AV-DSP Airflow Probe

    $295.00
    The AV-DSP is a single point, insertion, air velocity transmitter with user selectable 0-10vDC or 4-20mA outputs and 4 user selectable measurement ranges (0-4m/s, 0-8m/s, 0-16m/s or 0-32m/s). A standard Insertion length of up to 240mm and probe diameter of 19mm, the AV-DSP will fit in a wide variety locations. Using the hot-wire method of airflow measurement, the AV-DSP needs no maintenance. Learn More
  6. Omni Eco Line OMNI-TUF-200F Fixed Ultrasonic Flow Meter

    Omni Eco Line 200F Ultrasonic Flow Meter

    $995.00
    The Omni Eco Line 200F is a low cost clamp on ultrasonic flow meter is ideal for long-term deployment for flow measurement and closed-pipe applications, such as liquid process control, water flow measurement (hot/chill water, city water, sea water), sewage and sludge measurement, and measurements of oil (crude/diesel/fuel), chemicals (alcohol, acids, etc.), beverage, and many other liquids. Learn More
  7. PDFM3 Ultrasonic Flow Meter

    PDFM3 Ultrasonic Doppler Flow Meter

    $1,595.00
    The PDFM3 is a handheld non-invasive Doppler flowmeter for measuring the flow rate and total volume of liquids flowing through process and effluent pipelines. It is suitable for a wide range of liquids, including aerated water, liquids containing suspended solids, slurries and sludge's. The PDFM3 requires fluids with a minimum concentration of 100 ppm of solids or bubbles having minimum size of 100 microns. Learn More
  8. DFS2 Ultrasonic Flow Switch

    DFS2 Doppler Flow Switch

    $900.00
    The DFS2 Doppler Flow Switch continuously measures the velocity of fluid in pipelines using the non-intrusive Doppler principle. The DFS2 is quick and easy to install with no holes in the pipe, no sensor fouling, no maintenance and no downtime for sensor installation. The DFS2 includes a relay with adjustable high and low setpoint control and adjustable delay-on and delay-off timers. The DFS2 has two selectable flowranges, 0 - 2m/s and 0 - 6 m/s, with the flow rate indicated on the 10 LED bar graph flow indicator. Learn More
  9. DFM2 Doppler Flow Meter

    DFM2 Doppler Flow Meter

    $2,400.00
    The DFM2 is a microprocessor-controlled flowmeter for the measurement and control of liquids flowing through process and effluent pipelines using the non-intrusive Doppler principle. The flowmeter display indicates flow rate and total volume for a wide range of liquids, including aerated water, liquids containing suspended solids, slurries and sludges. The Flowmetrix DFM2 requires fluids with a minimum concentration of 100 ppm of solids or bubbles having minimum size of 100 microns. The unit has a 4-20mA output for flow rate and a pulse output for flow total. Learn More
  10. OMNI-TUF-200M

    OMNI-TUF-200M DIN-Mount Ultrasonic Flow Meter

    $655.00
    This low cost clamp on ultrasonic flowmeter is ideal for long-term deployment for flow measurement and closed-pipe applications, such as liquid process control, water flow measurement (hot/chill water, city water, sea water), sewage and sludge measurement, and measurements of oil (crude/diesel/fuel), chemicals (alcohol, acids, etc.), beverage, and many other liquids. Once the sensors are clamped on the pipe using the supplied stainless steel straps it can be programmed in a matter of minutes via RS485. In addition to the 4-20mA and pulse outputs for flow rate and totalizer. Learn More

Items 1 to 10 of 19 total

per page
Page:
  1. 1
  2. 2