Welcome to Omni Instruments!

omni Menu


Items 11 to 18 of 18 total

per page
  1. 1
  2. 2
  1. 5531 Loop Powered Digital Indicator

    5531 Loop Powered Indicator

    The 5531 LCD display is loop-powered and suitable for both standard and hazardous area applications. As an I.S. variant the display can be installed in zone 0, 1 and 2. The visibility in darkness is a unique feature of this display due to the flexible setting of luminosity. Learn More
  2. SWP-99

    SWP-99 Multi-Channel Display for 0/4...20mA

    SWP-99 Multi-channel Process Indicator The SWP-99 Multi-channel Process indicator is designed to measure and display up to 0/4-20mA inputs. The LCD allows up to 8 channels to be displayed at any one time and also the trend of any channel for the preceeding 12 or 90 seconds. The device is equipped with 2, 4 or 8 current inputs and 2 electronic relay outputs. Learn More
  3. CMC-99

    CMC-99 Multi-Channel Display, Controller & Data Logger

    The Linux based CMC-99 multi-channel display, controller and data acqusition system allows you to monitor and control up to 48 seperate devices in a single, compact system. Analogue and digital I/O can be viewed and controlled on the clear, 3.5" color TFT touchscreen. Two built in USB ports allow connection to memory keys, keyboards and mice. Available with RS232, RS485 and Ethernet communication options. Learn More
  4. TR200

    TR200 Strain Gauge Meter

    The TR200 strain gauge indicator's predominant feature is its 10-channel capability that enables up to 10 separate strain gauge transducers to be calibrated in the required engineering units with one single indicator. Using an intelligent input connector the TR200 indicator automatically recognises the connected strain gauge sensor and ports it to the correct channel. Learn More
  5. SY021

    SY021 Strain Gauge Display


    The SY021 is a portable battery powered load cell readout / strain gauge display designed to work with all types of strain gauge based transducer.

    The load cell readout's alpha-numeric display has 2 lines of 16 characters with user friendly prompts to assist with the configuration and calibration and provides full 5-digit resolution of ±99999.

    Learn More
  6. TR150

    TR150 Load Cell Display

    The TR150 load cell indicator features a 7-digit LCD display which makes it suitable for any monitoring application from general industrial up to high accuracy reference standards. Other features include peak & trough capture, display update rates up to 25Hz, display hold / freeze, shunt calibration, integrated TEDS (Transducer Electronic Data Sheet) functionality and optionally an RS232 serial data output. Learn More
  7. Electronic Indicator N320

    Electronic Indicator N320


    The N320 is a temperature meter that provides you in the frontal display the measured temperature of the sensor connected to its terminals. The temperature sensors available are NTC Thermistor, Pt100, Pt1000 and J, K, T type thermocouple, with offset correction capability.

    Learn More
  8. MT100 Panel Mount Paperless Recorder

    Graphtec MT100 Paperless Recorder

    The MT100 is designed to replace older display and paper chart recorder systems that are typically mounted in panels, by offering a DIN sized drop in installation. One unit can accept up too ten voltage, temperature, humidity, pulse and logic signals, display them on color LCD screen and save the data on-board for later retrieval. USB, USB memory key and Ethernet connections allow a variety of options to analyse and archive your data. Learn More

Items 11 to 18 of 18 total

per page
  1. 1
  2. 2