Welcome to Omni Instruments!

omni Menu

Search results for 'test'

Items 1 to 10 of 42 total

per page
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. UM-5 Ultrasonic Thickness Meter

    UM-5 Ultrasonic Thickness Meter

    Featuring both live A-Scan and B-Scan modes, the UM-5 ultrasonic thickness meter gives you an accurate picture of your material thickness over by displaying the thickness as you move the probe across the material. For precision measurements the 0.01mm resolution and ±0.05mm give you pin point accuracy. Learn More
  2. M Series LVDT

    M Miniature LVDT Displacement Sensor


    The M series of miniature LVDT displacement transducers are available in ranges from ±0.25mm (0-0.5mm) up to ±50mm (0-100mm).

    Available in either a 4-wire or 6-wire configurations, the miniature LVDT requires a sinusoidal AC supply voltage and provide an AC mV/V output signal which is linearly proportional to displacement.

    Learn More
  3. GTS Sword Hygrometer Kit

    GTS Sword Hygrometer

    The GTS is the classic sword hygrometer for the the measurement of ERH in the paper industry. Its high precision, fast response and cost effective price have made it the automatic choice of paper mills, merchants, converters and the printing industry for over 20 years. Learn More
  4. TM-8812

    TM-8812 Omni Ultrasonic Thickness Gauge

    The TM-8812 is a handheld microprocessor-controlled ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminum, titanium, plastics, ceramics, glass, plastics including rubber and other good ultrasonic wave conductors, as long as they have parallel top and bottom surfaces. This gauge can be used to determine the exact thickness of pipework to ensure the correct settings on an ultrasonic flow meter. The TM-8812 will check a pipe for loss of thickness due to corrosion or erosion. Learn More
  5. APCI-1500 PCI Digital I/O Card

    APCI-1500 Digital 32 Channel I/O Board

    Digital I/O board, 16 optically isolated digital inputs (including 14 interruptible inputs), all inputs filtered with reverse voltage protection. 16 optically isolated digital outputs, maximum output current per channel 500 mA. Built-in watchdog function, timer/counter and short-circuit protection. Nominal voltage 24V. Learn More
  6. DRFN

    DRFN Brushless Square Drive Torque Sensor


    The DRFN series of brushless non-contact torque sensors provide accurate torque measurement in continuously rotating applications at speeds up to 12,000rpm and has a square drive type mechanical connection.

    The DRFN features integral signal conditioning gives a ±5Vdc analogue signal. A 360 pulses/revolution angle output is optional on all capacities.

    Learn More
  7. DRDL

    DRDL Dual-Range Rotary Torque Sensor

    The DRLD series of dual-range rotary torque sensors have parallel shaft connections and offers two operating ranges in one device making it ideal for test and measurement applications where high accuracy measurements across a broad operating range are required. Learn More
  8. AV-DSP Airflow Probe

    AV-DSP Airflow Probe

    The AV-DSP is a single point, insertion, air velocity transmitter with user selectable 0-10vDC or 4-20mA outputs and 4 user selectable measurement ranges (0-4m/s, 0-8m/s, 0-16m/s or 0-32m/s). A standard Insertion length of up to 240mm and probe diameter of 19mm, the AV-DSP will fit in a wide variety locations. Using the hot-wire method of airflow measurement, the AV-DSP needs no maintenance. Learn More
  9. Digiforce



    The Digiforce non-contact tension meter comprises of a hand held battery powered instrument with a matrix keypad, alphanumeric display and magnetic flux density sensor.  It is operated by holding it close to but not touching the vibrating member to be measured.

    It operates on the principle that when a tensioned member anchored between two points is struck it vibrates at a frequency related to its tensile stress.

    Learn More
  10. UM-2D Ultrasonic Thickness Meter

    UM-2 Ultrasonic Thickness Meter

    The UM-2 series ultrasonic thickness gauge offers accurate thickness measurements with an optional echo to echo function, allowing you too measure material thickness though coatings such as paint. The UM also allows you to measure the actual coating thickness, giving you pin-point accuracy down to a 0.0003" or 0.01mm resolution. Its built in memory allows you to store 500 test values and the built in calibration block allows easy on-site calibration. Learn More

Items 1 to 10 of 42 total

per page
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5