Welcome to Omni Instruments!

omni Menu

Search results for 'coupling Gel'

9 Item(s)

per page

    DBBSMM Miniature S-Beam Load Cell


    The DBBSMM series of miniature S-Beam load cells are suitable for use in tension and compression and lend themselves to both force and load measurement applications where the space to mount a standard size load cell is not available.

    All of our miniature S-Beam load cells offer high accuracy of better than ±0.03% of their rated capacity and can be optionally gel-filled to provide a waterproof device suitable for applications such as wave tank monitoring.

    Learn More
  2. DSCC

    DSCC Pancake Load Cell


    They can operate in both tension and compression and are commonly used in materials testing and component fatigue testing applications for axial force measurements where a high accuracy, low-profile device is required.

    The high frequency response of the DSCC pancake load cells also makes them ideal for dynamic force and load measurement applications such as crash test walls. The high-speed analogue SGA amplifier is an ideal compliment to the DSCC pancake load cell, offering a conditioned signal output of 4-20mA, ±5Vdc or ±10Vdc with a bandwidth of up to 6kHz.

    Learn More
  3. APCI-1500 PCI Digital I/O Card

    APCI-1500 Digital 32 Channel I/O Board

    Digital I/O board, 16 optically isolated digital inputs (including 14 interruptible inputs), all inputs filtered with reverse voltage protection. 16 optically isolated digital outputs, maximum output current per channel 500 mA. Built-in watchdog function, timer/counter and short-circuit protection. Nominal voltage 24V. Learn More
  4. 2261 mV Transmitter

    2261 Load Cell Amplifier

    The 2261 is a programamble load cell amplifier suitable for 4 wire bridge / strain gauge sensors. Both zero and span are programmable via the front key pad and the LED display allows easy setup.The unit also has NPN/PNP input for external taring and a regulated supply for standard transducers. Learn More
  5. DTDR-F

    DTDR-F Wireless Torque Sensor

    The wireless torque sensor uses the latest 'T24' range of wireless telemetry equipment from Mantracourt Electronics, which features an advanced power management system provides superb battery life of up to 1 year based on a transmission rate of once per minute. Increasing the rate to once per second will still yield 27 days of uninterrupted operation. Learn More
  6. DRBK

    DRBK Low Cost Rotary Torque Sensor

    The DRBK series of low cost rotary torque sensors have parallel shaft connections and offer a budget option for torque measurement in continuously rotating, high duty-cycle applications where the torque to measured does not exceed 1000Nm. Learn More
  7. DRFL

    DRFL Non-Contact Torque Sensor

    The non-contact torque sensor features integral signal conditioning giving a ±10Vdc analogue signal with a bandwidth of 200Hz as standard, while a conditioner with a 1kHz bandwidth is optional. A pulsed speed output (60 pulses/revolution) or angle output (360 pulses/revolution) is available on all models. Learn More
  8. DRDL

    DRDL Dual-Range Rotary Torque Sensor

    The DRLD series of dual-range rotary torque sensors have parallel shaft connections and offers two operating ranges in one device making it ideal for test and measurement applications where high accuracy measurements across a broad operating range are required. Learn More
  9. DRWPL

    DRWPL Waterproof Torque Sensor

    The DRWPL series of waterproof torque sensors are rated to IP67 and have been specially designed for operation in harsh environments. They will operate happily where dust, water and high humidity are present constantly, and will even withstand short-term immersion to less than 1 metre depth for 30 minutes maximum. Learn More

9 Item(s)

per page