Welcome to Omni Instruments!

omni Menu

Search results for 'amplifier'

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3
  1. 22040 Isolation Amplifer

    2204 Isolation Amplifier

    $203.00
    Input galvanically separated from output and supply ~ Current or voltage input Signal conversion ~ Current and voltage output ~ 24 VDC supply or universally supplied Applicable in PELV/SELV circuits Learn More
  2. DDEN

    DDEN Submersible In-Line Tension & Compression Load Cell

    $613.00
    The submersible load cell is sealed using 'O' rings to provide integrity at depths up to 10 metres as standard, with greater depths possible if the appropriate modifications are made to the design. The standard model is currently being used in various applications including wave tank measurement systems and mooring buoy cable tension monitoring. Learn More
  3. DSCC

    DSCC Pancake Load Cell

    $997.00

    They can operate in both tension and compression and are commonly used in materials testing and component fatigue testing applications for axial force measurements where a high accuracy, low-profile device is required.

    The high frequency response of the DSCC pancake load cells also makes them ideal for dynamic force and load measurement applications such as crash test walls. The high-speed analogue SGA amplifier is an ideal compliment to the DSCC pancake load cell, offering a conditioned signal output of 4-20mA, ±5Vdc or ±10Vdc with a bandwidth of up to 6kHz.

    Learn More
  4. DSCRC

    DSCRC Low Profile Tension & Compression Load Cell

    $752.00
    The DSCRC series of low profile/pancake load cells are manufactured in stainless steel and are suitable for use in weighing and force measurement applications. They can operate in both tension and compression and are commonly used in materials testing and component fatigue testing applications for axial force measurements where a high accuracy, low-profile device is required. Learn More
  5. Pi600B

    Pi600B Atmospheric Pressure Sensor

    $307.00

    The Pi600B barometric pressure sensor / atmospheric pressure sensor is based on the standard Pi600 industrial pressure transducer and has a sensing range from 750 to 1250 millibar absolute. It is designed specifically for the measurement of barometric pressure / atmospheric pressure.

    Learn More
  6. DRBK

    DRBK Low Cost Rotary Torque Sensor

    $2,195.00
    The DRBK series of low cost rotary torque sensors have parallel shaft connections and offer a budget option for torque measurement in continuously rotating, high duty-cycle applications where the torque to measured does not exceed 1000Nm. Learn More
  7. SGA

    SGA Load Cell Amplifier

    $276.00

    The SGA series of load cell amplifiers is designed to provide a high stability, high speed, conditioned analogue output from up to four 350Ω strain gauge bridges connected in parallel.

    The SGA load cell amplifier is capable of working with very low-level input signals right down to 0.06mV/V and amplifying them into a stable, high-level industry standard process signal such as 0-10Vdc or 4-20mA.

    Learn More
  8. ICA with Enclosure

    ICA Miniature Load Cell Amplifier

    $115.00

    There are a total of six output variants of the miniature ICA load cell amplifier available:

    • ICA1S: 0.1 to 10Vdc (13 to 30Vdc supply)
    • ICA2S: 0.1 to 5Vdc (8.5 to 28Vdc supply)
    • ICA3S: ±10Vdc (±13 to ±15Vdc bi-polar supply)
    • ICA4S: 4-20mA (3-wire) (10 to 30Vdc supply)
    • ICA5S: 4-20mA (2-wire) (7.5 to 30Vdc supply)
    • ICA6S: ±10Vdc (24 to 30Vdc supply)
    Learn More
  9. Graphtec GL7000

    GL7000 Modular Data Acquisition Unit

    $2,400.00
    The GL7000 is a high speed modular data acquisition unit that can be built up to fit a variety of different applications with a selection of different modules available to provide voltage, temperature or digital inputs along with voltage and alarm outputs. A total of 10 modules can be added to provide up to 112 channels on each GL7000. Optional 5.7" HD color display allows you to view current readings without the need of a PC. Learn More
  10. VM220 Vibration Meter

    VM220 Portable Vibration Meter

    $865.00
    The MTN/VM220 is a compact, rechargeable, portable handheld Vibration meter designed to conform to ISO10816-3 and operate with a constant current accelerometer providing accurate vibration and temperature measurements. Features RMS, peak, peak-peak, crest factor readings in acceleration, velocity or displacement modes. Learn More

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3